From the workbench · Part 1 of the greenhouse series
Why we stopped building greenhouse walls on the ground
Our first plan for the greenhouse walls ended with one of them on our heads. Daniel built the walls flat on the ground, and the plan was to stand each one up and set it in place. The south wall made it up. Then it came back down.
This is part three of our greenhouse series. Want the plans when they're ready? Get on the list.
What happened when we built the walls on the ground?
Daniel framed the walls lying flat, so we could stand them up and install them one wall at a time. We rolled the south wall over on wheels, got it standing, and started nailing it in.
Then the whole wall fell. It broke one window and hit us both on the head. Some colorful words were said.
Lesson one: I don't lift walls anymore. I have a bad back, with 2 bars and 17 screws in it, and I was a little too weak to be holding that wall up. In my defense, I'm partly hardware.
Lesson two: Georgia has its own word for those colorful words. Here, when you cuss something out, they call it blessing it. I grew up in the South with a very old-school Southern grandpa, the kind who called lunch dinner and dinner supper, and I had never heard that one until Georgia. That wall got blessed.
Josie

What did we change after the wall fell?
Two things.
We framed everything very sturdy first. No more building a whole wall on the ground and standing it up. The frame went up solid first.
We set the windows one at a time. Instead of lifting a wall full of windows, we installed each window into the frame by itself.

Should you build greenhouse walls flat or frame first?
Some builds do stand up walls built flat. Mother Earth News has a salvaged-window greenhouse build that does exactly that: the wall assemblies are built on a flat surface, stood up, and the end assemblies are plumbed and braced with scrap lumber. That build also frames first and sets the windows after.
That's the order we landed on too. Frame first, brace it well, then set the windows one by one.
Frequently asked questions
Can you build a greenhouse wall flat and stand it up?
Yes, some builds do it that way. We tried it, and our south wall fell while we were nailing it in. If you go that route, the Mother Earth News window greenhouse guide plumbs and braces its end walls with scrap lumber.
How do you install old windows in a greenhouse frame?
After our wall fell, we built a sturdy frame first and set the windows in one at a time. The Mother Earth News build does something similar: battens nailed to the studs, caulk on the battens, then the windows set in place, with flashing between stacked windows and stops on the inside to hold them.
How much did your window greenhouse cost?
Under $1,000. The windows were $200, and the rest of the materials came in under $800. We built on a concrete pad that was already there.
Does The Second Sowing sell plans for the window greenhouse?
We're putting together plans for this greenhouse. Get on the list and we'll let you know when they're ready.
Keep reading
From The Second Sowing
- Start here: The whole window greenhouse build, every part in order
- Part 1: How we found old windows for a greenhouse for $200
- Part 2: How we tore down a termite-damaged shed with a truck
- Part 4: How we painted old windows and finished our greenhouse
- Join the list
Further reading
- Build a Greenhouse From Old Windows, Mother Earth News. A full salvaged-window build, including how they framed, braced, and set the windows.
- Window Pane Greenhouse, Gardening Know How. Sourcing windows and framing ideas.
Next up: the door, the arch window, the roof, and the paint. Want the greenhouse plans? Get on the list and you'll hear from us when they're ready.
Window greenhouse plans
We're putting together plans for this greenhouse. Join the list and we'll email you when they're ready.